ASTM

ASTM_CoverThe standards in this compilation were published and are copyrighted by ASTM International.  The grouping of standards included have been selected by the American Concrete Pipe Association and may not be inclusive of all ASTM standards related to the subject.

ASTM Standards on Concrete Pipe:
Order Here – Preview (1)Preview (2)

Please visit the ASTM website for additional standards.

RCP
A 1064 Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
A 615 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
A 706 Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement
A 767 Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
A 775 Standard Specification for Epoxy-Coated Steel Reinforcing Bars
A 884 Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement
C 14 Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe
C 31 Standard Practice for Making and Curing Concrete Test Specimens in the Field
C 33 Standard Specification for Concrete Aggregates
C 39 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
C 40 Standard Test Method for Organic Impurities in Fine Aggregates for Concrete
C 42 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
C 76 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
C 118 Standard Specification for Concrete Pipe for Irrigation or Drainage
C 136 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
C 138 Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
C 143 Standard Test Method for Slump of Hydraulic-Cement Concrete
C 150 Standard Specification for Portland Cement
C 172 Standard Practice for Sampling Freshly Mixed Concrete
C 173 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
C 231 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
C 361 Standard Specification for Reinforced Concrete Low-Head Pressure Pipe
C 403 Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
C 412 Standard Specification for Concrete Drain Tile
C 443 Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
C 444 Standard Specification for Perforated Concrete Pipe
C 478 Standard Specification for Precast Reinforced Concrete Manhole Sections
C 494 Standard Specification for Chemical Admixtures for Concrete
C 497 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile
C 505 Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
C 506 Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe
C 507 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
C 595 Standard Specification for Blended Hydraulic Cements
C 618 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
C 654 Standard Specification for Porous Concrete Pipe
C 655 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe
C 805 Standard Test Method for Rebound Number of Hardened ConcreteC 822 Standard Terminology Relating to Concrete Pipe and Related Products
C 877 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections
C 913 Standard Specification for Precast Concrete Water and Wastewater Structures
C 923 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals
C 924 Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method (Withdrawn 2013)
C 969 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
C 985 Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe
C 989 Standard Specification for Slag Cement for Use in Concrete and Mortars
C 990 Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
C 1064 Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
C 1103 Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
C 1116 Standard Specification for Fiber-Reinforced Concrete
C 1131 Standard Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems
C 1214 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
C 1227 Standard Specification for Precast Concrete Septic Tanks
C 1240 Standard Specification for Silica Fume Used in Cementitious Mixtures
C 1244 Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
C 1417 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design
C 1478 Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals
C 1479 Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations
C 1602 Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete
C 1610 Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique
C 1611 Standard Test Method for Slump Flow of Self-Consolidating Concrete
C 1618 Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure
C 1619 Standard Specification for Elastomeric Seals for Joining Concrete Structures
C 1621 Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring
C 1628 Standard Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets
D 2240 Standard Test Method for Rubber Property—Durometer Hardness

Boxes
A 1064 Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
A 615 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
A 706 Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement
A 767 Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
A 775 Standard Specification for Epoxy-Coated Steel Reinforcing Bars
A 884 Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement
C 31 Standard Practice for Making and Curing Concrete Test Specimens in the Field
C 33 Standard Specification for Concrete Aggregates
C 39 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
C 40 Standard Test Method for Organic Impurities in Fine Aggregates for Concrete
C 42 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
C 136 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
C 138 Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
C 143 Standard Test Method for Slump of Hydraulic-Cement Concrete
C 150 Standard Specification for Portland Cement
C 172 Standard Practice for Sampling Freshly Mixed Concrete
C 173 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
C 231 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
C 403 Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
C 494 Standard Specification for Chemical Admixtures for Concrete
C 595 Standard Specification for Blended Hydraulic Cements
C 618 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
C 805 Standard Test Method for Rebound Number of Hardened ConcreteC 822 Standard Terminology Relating to Concrete Pipe and Related Products
C 877 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections
C 989 Standard Specification for Slag Cement for Use in Concrete and Mortars
C 990 Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
C 1064 Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
C 1116 Standard Specification for Fiber-Reinforced Concrete
C 1131 Standard Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems
C 1240 Standard Specification for Silica Fume Used in Cementitious Mixtures
C 1443 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
C 1478 Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals
C 1504 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains
C 1577 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
C 1602 Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete
C 1610 Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique
C 1611 Standard Test Method for Slump Flow of Self-Consolidating Concrete
C 1619 Standard Specification for Elastomeric Seals for Joining Concrete Structures
C 1621 Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring
C 1677 Standard Specification for Joints for Concrete Box, Using Rubber Gaskets
D 2240 Standard Test Method for Rubber Property—Durometer Hardness

CMP
A 849 Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
B 788 Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe
B 789 Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers
A 1042 Standard Specification for Composite Corrugated Steel Pipe for Sewers and Drains
A 761 Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
A 762 Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
A 760 Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
A 807 Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
A 849 Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
A 929 Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
A 978 Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications
A 926 Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe
A 930 Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
A 742 Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
A 796 Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
A 798 Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
A 862 Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe
B 744 Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
B 745 Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
B 746 Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
B 790 Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits
D 1056 Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber

Plastic
D 1598 Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
D 1599 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
D 2122 Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
D 2239 Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
D 2241 Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
D 2290 Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
D 2321 Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
D 2412 Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
D 2444 Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
D 2665 Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
D 2680 Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
D 2729 Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
D 2749 Symbols for Dimensions of Plastic Pipe Fittings
D 2837 Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
D 3034 Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
D 3212 Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
F 405 Specification for Corrugated Polyethylene (PE) Pipe and Fittings
F 412 Terminology Relating to Plastic Piping Systems
F 442 Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)
F 449 Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
F 477 Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
F 481 Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields
F 512 Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
F 585 Guide for Insertion of Flexible Polyethylene Pipe Into Existing Sewers
F 610 Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique
F 667 Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings
F 679 Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
F 725 Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards
F 758 Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage
F 794 Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
F 891 Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
F 894 Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
F 905 Practice for Qualification of Polyethylene Saddle-Fused Joints
F 913 Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe
F 948 Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
F 949 Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
F 1057 Specification for Frying and Braising Pans, Tilting Type
F 1336 Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
F 1365 Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals
F 1417 Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines Using Low-Pressure Air
F 1429 Test Methods for Specific Gravity of Water and Brine
F 1473 Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins
F 1488 Specification for Coextruded Composite Pipe
F 1588 Test Method for Constant Tensile Load Joint Test (CTLJT)
F 1674 Test Method for Joint Restraint Products for Use with PVC Pipe
F 1675 Practice for Sampling Two-Phase Geothermal Fluid for Purposes of Chemical Analysis
F 1732 Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material
F 1759 Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
F 1760 Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content
F 1803 Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter
F 1962 Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
F 2018 Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
F 2136 Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
F 2263 Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water
F 2306 Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications
F 2307 Specification for Series 10 Poly(Vinyl Chloride) (PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter (Withdrawn 2011)
F 2389 Specification for Pressure-rated Polypropylene (PP) Piping Systems
F 2418 Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers
F 2433 Test Method for Determining Thermoplastic Pipe Wall Stiffness
F 2435 Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe
F 2487 Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene and Polypropylene Pipelines
F 2510 Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density Polyethylene Drainage Pipes
F 2536 Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs
F 2562 Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage
F 2618 Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
F 2648 Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications
F 2649 Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks
F 2657 Test Method for Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX) Tubing
F 2658 Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings
F 2686 Specification for Glass Fiber Reinforced Thermoplastic Pipe
F 2720 Specification for Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large Diameter Pipe
F 2736 Specification for 6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe
F 2737 Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units
F 2764 Specification for 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications
F 2787 Practice for Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers
D 3350 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials